Monitoring the quality of raw sewage

Measuring the water chemistry parameters of influent wastewater can have a number of benefits that contribute to environmental protection and water treatment efficiency. Measuring influent wastewater has the following advantages:


  1. Industrial process optimisation:
    Industrial companies can optimise their industrial emissions using measurement results, which can reduce environmental impacts and costs.
  2. Rational resource management:
    Based on measurements, more efficient use of resources and reduction of pollutant emissions can contribute to sustainable water management.
  3. Improving the control of wastewater treatment plants:
  4. So far, either treated wastewater or bioreactor data have been used for control. It is now also possible to measure the incoming wastewater to determine the quality of the wastewater that will enter the reactors. This will allow more advanced and efficient operation, saving significant amounts of energy and chemicals.
  5. Improving water quality:
    Water chemistry measurements allow industrial and municipal wastewater treatment plants to easily check that their discharges comply with environmental regulations and meet the required limits.

These benefits underline that measuring the water chemistry parameters of influent wastewater is key to environmental protection, cost savings and efficient water treatment. Measurements help to create a more sustainable and healthier environment.

Technical specification

Measurable water samples: bioreactors, influent wastewater

Measuring range:
     - KOI LR: 50 - 300 ppm
     - KOI MR: 100 - 1600 ppm
     - KOI HR: 300 - 3200 ppm
     - NH4-N LR: 0,1 - 3 ppm
     - NH4-N MR: 0,3 - 10 ppm
     - NH4-N HR: 3 - 80 ppm
     - NO2-N: 0,05 - 0,6 ppm
     - NO3-N: 4 - 30 ppm
     - PO4-P LR: 0,05 - 1 ppm
     - PO4-P MR: 0,3 - 10 ppm
     - PO4-P HR: 1 - 30 ppm
     - pH: 2-12
     - Temperature: 0-50 °C‍

Communication: GSM
Power requirements: 230V, 10 A, 1 phase
Maintenance requirement: 6 months
Operating temperature: -10 - 40 °C
Maximum measurement frequency: 20-60 min

WML product from the insideWML product from the inside

Contact us

Are you interested? Or you just have a question? Contact us on one of the contact details below.

Email address
H-1101 Budapest, Csilla utca 10/A.
Phone number
+36/30 680 6369
Message sent. Our college will contact you shortly.
There was some error sending the message. Please try again later.
WML logo

The MiniLab News Every Month To Your Inbox

* indicates required